세미나
Physicochemical Analysis of Infiltrated Cathode Symmetric Cells for Intermediate Temperature SOFCs
- 일시 2022-09-23 15:00 ~ 18:00
- 장소 대양AI센터 B116호
- 연사 송선주 교수
- 소속 전남대학교 신소재공학부
Lowering the operating temperature of the solid oxide fuel cell is important to prevent material degradation but causes a high polarization problem that slows down the electrode kinetics. The infiltration of multi-cation oxide nanoparticle catalysts on the cathode backbone can provide low activation energies to catalyze several electrochemical processes. In this study, Sm0.5Sr0.5CoO3-δ(SSC55) nanoparticles were infiltrated on the surface of the La0.6Sr0.4Co0.2Fe0.8O3-δ(LSCF6428) backbone pasted on the GDC electrolyte. Electrochemical impedance (EI) spectra of the cells before and after infiltration were measured under the various thermodynamic conditions (700~600℃, pO2=0.21~0.02atm). The parameters (Rs,Rp,Cchem,
and CHN0) of the transmission line model (TLM) expressing the polarization of the cathode were analyzed in detail. Rs is the diffusion resistance of the bulk or surface and Rp is the resistance of surface reactions such as the decomposition resistance of gas molecules. Cchem is the chemical capacitance resulting from the nonstoichiometry of the electrode material, and CHN0 is the capacitance effect of the surface which varies with frequency. Trends of parameters according to the thermodynamic variables (temperature, pO2 and current density) were sufficiently discussed by analyzing the cells before and after infiltration, and how the impedance analysis should be performed to microstructure-modified electrodes was discussed.
and CHN0) of the transmission line model (TLM) expressing the polarization of the cathode were analyzed in detail. Rs is the diffusion resistance of the bulk or surface and Rp is the resistance of surface reactions such as the decomposition resistance of gas molecules. Cchem is the chemical capacitance resulting from the nonstoichiometry of the electrode material, and CHN0 is the capacitance effect of the surface which varies with frequency. Trends of parameters according to the thermodynamic variables (temperature, pO2 and current density) were sufficiently discussed by analyzing the cells before and after infiltration, and how the impedance analysis should be performed to microstructure-modified electrodes was discussed.Copyright 2021 Department of Hybrid Materials Research & Advanced Materials Engineering, Sejong University. All rights reserved.
143-747(05006) 서울특별시 광진구 능동로 209(군자동) 세종대학교 충무관 817호 하이브리드 재료 응용 연구소
Tel : +82-2-3408-3786 Fax : +82-2-3408-4342
